RockyGuard RG16 Snow Guard

RockyGuard RG16 Snow Guard - Copper

Photos shown are of the minimum installation of the eave-level rows of snow guards.  In some cases, additional rows of snow guards should be installed on other locations of the roof.  Rocky Mountain Snow Guards will help you determine the best layout for your particular needs.

Buy Now at SnowGuardDepot.com

A snow guard designed for new installations on synthetic slate and shake roofs.

RockyGuard RG16 Snow Guards are available in:

  • Powder Coated EG Steel
  • Powder Coated Aluminum
  • Mill Finish Aluminum
  • Copper
Product Prices
$5.94
Steel
$9.25
Copper

Snow Retention System: 

  • Clip Style Snow Guards

Product Category: 

Roof Type Category: 

  • Cedar Shake and Shingle

Product Cut Sheet

RockyGuard RG16 Snow Guard Cut Sheet

Download Detailed Cutsheet (PDF): 
rmsg-rg16-snow-guard-cut-sheet.pdf

Materials List:

  • Powder Coated EG Steel
  • Powder Coated Aluminum
  • Mill Finish Aluminum
  • Copper

Notes:

  1. Snow guards are to be installed to manufacturer’s specifications.
  2. Contact manufacturer for selected layout.
  3. For custom materials contact manufacturer.
  4. Other sizes are available on a custom basis.

Installation Instructions

RockyGuard Layout Pattern Guide for Slate, Shake and Shingle Roofs

Layout pattern guide for Slate, Shate, Asphalt Shingle, Metal Shingle and Synthetic Slate and Shake Roofs

Instruction Steps:

1)

Minimum Rocky Guard Eave Row

The row at the eave is the minimum requirement for all roofs.  Rocky Guards are spaced approximately 12” O/C and are located on second course of roofing material at or near the load bearing wall. 

2)

Additional Rows (if required)

Additional rows of Rocky Guards may be necessary to stabilize the snow on longer roof decks, steeper roofs, slippery roof surfaces such as slate, synthetic products and metal and on roofs in heavy snow load areas.  

Contact Rocky Mountain Snow Guards for a recommended Rocky Guard layout if any of these factors are present.

Installed Product Image

Download Installation Instructions (PDF): 
rmsg-rockyguardlayoutpatternguide.pdf

Installation Notice

Note:   Roof support structure should always be reviewed to make sure that the additional snow held on the roof will not cause structural issues.  On asphalt shingle roofs less than 8/12 pitch where ground snow loads do not exceed 110 psf, additional rows are not required above the eave row.

Snow Guard Placement for Shingle Style Roofs

Guide for placing snow guards on various shingle-style roofs, like: asphalt shingle, title, slate, metal shingle and synthetic slate and shake.

Instruction Steps:

Less than a 6/12 Pitch

For roofs less than a 6/12 pitch, the distance between the butt end and the pad face must be a minimum of 3 times (3x) the thickness of the roofing material (x).

Greater than a 6/12 Pitch

For roofs greater than a 6/12 pitch, the distance between the butt end and the pad face must be a minimum of 6 times (6x) the thickness of the roofing material (x).

Download Installation Instructions (PDF): 
snow-guard-placement-guide-shingle-style-roofs.pdf

3-Part Specification

Download Specification Sheet (PDF): 
rg16-snow-guard-specificationsheet.pdf

RG16 Snow Guard Specification Sheet

Part 1 -GENERAL

1.1 SUMMARY

  1. WORK INCLUDES

    1. Install RG16 Snow Guard to roof system.
    2. Provide necessary components: RG16 Snow Guard and Adhesive.

1.2 RELATED SECTIONS

    1. Section 07320   Roofing Tiles
    2. Section 07600   Flashing and Sheet Metal
    3. Division 7          Thermal and Moisture Protection

1.3 SYSTEM

  1. COMPONENTS:

    1. RG Tile Snow Guard.
    2. Butyl Adhesive
  2. Design - To be recommended by Manufacturer or Structural Engineer.

1.4 SUBMITTAL

  1. Submit manufacturer’s specifications, recommended layout, product drawings and installation instructions.

1.5 QUALITY ASSURANCE

  1.  Installer to be experienced in roofing and snow retention for a minimum of not less than 5 years.

1.6 DELIVERY/ STORAGE

  1. Inspect material upon delivery and order replacements if necessary. Store materials in dry covered area prior to installation.

PART 2 -PRODUCTS

2.1 MANUFACTURER

  1. Rocky Mountain Snow Guards, Inc., 2055 S. Raritan, Denver, CO 80223, 877-414-7606, www.rockymountainsnowguards.com

2.2 MATERIALS

  1. RG16 Snow Guard 16 gauge electro galvanized steel.
  2. Butyl Adhesive

2.3 FINISH

  • TGIC Polyester powder coating

PART 3 – EXECUTION

3.1 EXAMINATION

  • Inspect roof structure and panel attachment to insure it will withstand snow loads. Correct all problems before installation of snow guards.

3.2 INSTALLATION

  • Install according to architects drawing and manufacturer’s instructions.
Get FREE Quote

Request Snow Guard or Snow Fence Layout & Quote

Get More Info

Request General Information or Pricing